Silenciador Ixil Xtrem Carbon Honda CB1000 Hornet (SP) 2025-26

Product Information

Product Overview

Give your Honda CB1000 Hornet a distinctive premium appearance and exhaust note with the IXIL Xtrem Carbon Silencer. Designed as a compact slip-on exhaust, it combines lightweight construction with a full carbon fibre body for a purposeful, race-inspired finish.

Both the silencer body and end cap are manufactured from 3K carbon fibre with high-temperature epoxy resin, displaying a bright carbon weave complemented by anodised aluminium trim. Measuring 256 mm long and weighing approximately 1.054 kg, its compact conical profile complements the aggressive styling of the CB1000 Hornet.

A removable dB killer provides flexibility over the exhaust character, while the supplied model-specific fitting components allow straightforward installation. Special fitting requirements apply to the CB1000 Hornet SP due to its original exhaust valve configuration, as detailed below.

Compatible Models

· Honda CB1000 Hornet 2025–2026
· Honda CB1000 Hornet SP 2025–2026

Key Features & Specifications

· Manufacturer: IXIL
· Range: Xtrem Carbon
· Product Type: Slip-On Silencer
· Material: 3K Carbon Fibre
· Finish: Bright Carbon Weave
· Length: 256 mm
· Weight: Approx. 1.054 kg
· dB Killer: Included & Removable
· Homologation: E-Marked for Road Use

Why Choose the IXIL Xtrem Carbon Silencer?

· Full 3K carbon fibre body and end cap provide a distinctive premium appearance.
· High-temperature epoxy resin construction is designed to withstand exhaust temperatures.
· Compact conical profile complements the aggressive styling of the CB1000 Hornet.
· Anodised aluminium trim provides a high-quality finishing detail.
· Removable dB killer provides flexibility over the exhaust character.

What's Included?

· IXIL Xtrem Carbon Silencer
· Link Pipe
· Removable dB Killer
· Model-Specific Mounting Kit & Hardware
· Installation Instructions

Assembly Instructions and Warnings

· Install using the supplied model-specific fitting components.
· Ensure the link pipe and silencer are correctly aligned before fully tightening all fasteners.
· No additional engine management optimisation is required for installation.
· Recheck all exhaust connections and mounting hardware after the first heat cycles and periodically thereafter.
· Professional installation is recommended.

CB1000 Hornet SP – Important Exhaust Valve Information

The CB1000 Hornet SP is equipped with an original exhaust valve. When fitting the IXIL Xtrem Carbon silencer, this valve is bypassed.

We recommend removing both exhaust valve control cables – one from the exhaust valve and the other from the servo actuator. Although removing both cables is not strictly necessary, leaving a cable in place could cause problems if it becomes restricted or unable to move freely, potentially placing unnecessary load on the servo motor.

The IXIL link pipe incorporates an internal twin-pipe design to replicate the effect of the original valve configuration:

· At lower engine speeds, exhaust gases are directed through the larger internal pipe.
· As engine speed increases, gases can flow through both the larger and smaller internal pipes.

Standard CB1000 Hornet: The standard model does not use the same exhaust valve configuration, so these additional steps are not required.

For a useful visual explanation of how this type of exhaust valve operates, see the following video. It demonstrates the EXUP valve on a Yamaha R1, which operates using a similar principle:

YouTube – Exhaust Valve / EXUP Demonstration