Silenciador forjado de carbono Ixrace Mk2 Honda CB1000 Hornet (SP) 2025-26

Product Information

Product Overview

Give your Honda CB1000 Hornet a distinctive race-inspired appearance and exhaust note with the IXRACE MK2 Carbon Forged Silencer. Designed as a compact and lightweight slip-on exhaust, the MK2 combines IXRACE's short conical profile with a distinctive forged carbon fibre construction.

The silencer body is manufactured from forged carbon fibre with high-temperature epoxy resin, providing excellent heat resistance and a unique patterned finish. At just 180 mm long and approximately 0.9 kg, the compact MK2 design complements the aggressive styling of the CB1000 Hornet without unnecessary bulk.

A removable dB killer provides flexibility over the exhaust character, while the required link pipe and model-specific fitting components are supplied for installation. Special fitting requirements apply to the CB1000 Hornet SP due to its original exhaust valve configuration, as detailed below.

Compatible Models

· Honda CB1000 Hornet 2025–2026
· Honda CB1000 Hornet SP 2025–2026

Key Features & Specifications

· Manufacturer: IXRACE
· Range: MK2
· Product Type: Slip-On Silencer
· Material: Forged Carbon Fibre
· Finish: Carbon Forged
· Length: 180 mm
· Weight: Approx. 0.9 kg
· dB Killer: Included & Removable
· Homologation: Homologated for Road Use

Why Choose the IXRACE MK2 Carbon Forged Silencer?

· Forged carbon fibre construction creates a distinctive premium appearance.
· Compact conical MK2 design complements the aggressive styling of the CB1000 Hornet.
· High-temperature epoxy resin construction provides strength and heat resistance.
· Removable dB killer provides flexibility over the exhaust character.
· Supplied with the required link pipe and model-specific fitting components.

What's Included?

· IXRACE MK2 Carbon Forged Silencer
· Link Pipe
· Removable dB Killer
· Model-Specific Fitting Kit
· Installation Instructions

Assembly Instructions and Warnings

· Install using the supplied link pipe and model-specific fitting components.
· Ensure the link pipe and silencer are correctly aligned before fully tightening all fasteners.
· Recheck all exhaust connections and mounting hardware after the first heat cycles and periodically thereafter.
· Professional installation is recommended.

CB1000 Hornet SP – Important Exhaust Valve Information

The CB1000 Hornet SP is equipped with an original exhaust valve. When fitting the IXRACE MK2 silencer, this valve is bypassed.

We recommend removing both exhaust valve control cables – one from the exhaust valve and the other from the servo actuator. Although removing both cables is not strictly necessary, leaving a cable in place could cause problems if it becomes restricted or unable to move freely, potentially placing unnecessary load on the servo motor.

The IXRACE link pipe incorporates an internal twin-pipe design to replicate the effect of the original valve configuration:

· At lower engine speeds, exhaust gases are directed through the larger internal pipe.
· As engine speed increases, gases can flow through both the larger and smaller internal pipes.

Standard CB1000 Hornet: The standard model does not use the same exhaust valve configuration, so these additional steps are not required.

For a useful visual explanation of how this type of exhaust valve operates, see the following video. It demonstrates the EXUP valve on a Yamaha R1, which operates using a similar principle:

YouTube – Exhaust Valve / EXUP Demonstration