PUIG Rear LED Indicators - Indian Scout Bobber

Enjoy new turn signals on your motorcycle with the Light indicator set by Puig.

• Includes rear Indicators and two resistors
• LED approved flashers, with black housing and smoked glass
• Position, stop and turn signal function

Technical information

It should be noted that most motorcycles use bimetallic relays, so their frequency depends directly on the amperage that circulates through the circuit.

When replacing them, this amperage varies, and therefore the frequency of blinking does also.

In case of using electronic relays, whose frequency does not depend on the amperage, it should not affect flicker. 

In case you have doubts about the relay that your motorcycle uses, it is advisable to mount the indicator and check the frequency.

The turn signal bulb should also be taken into account, in case the bulb's power varies you must replace it with one of the same power and it can be found in our catalog.

If our choice is to use an LED bulb, there are two options to balance the blink frequency:

One resistance must be incorporated in parallel in the circuit of the right side and another one in the left side.

Identify the relay of intermittency of the motorcycle (location and number of pins) and replace it with the one that corresponds to the list that Puig offers.

It should also be taken into account that if more than one relay intervenes in the blinking action, replacing only one will not solve the problem.